Cloud point extraction–atomic absorption spectrometry for pre-concentration and determination of cadmium in cigarette samples

A new complexing agent, 2-((2-((1H-benzo[d]imidazole-2yl)methoxy)phenoxy)methyl)-1H-benzo[d]imidazole (BIMPI), was used in cloud point extraction and applied for selective pre-concentration of trace amounts of cadmium in cigarette samples. Cadmium was complexed with BIMPI in a buffer solution (pH?=?10) using Triton X-114 as surfactant and quantitatively extracted into a small volume of the surfactant-rich phase after centrifugation. Under optimized conditions (pH?=?10.0, 0.8?×?10^?4?mol?L^?1 BIMPI and 0.08 % (w/v) Triton X-114), calibration graph was linear in the range of 34.0–1,670.0 μg?L^?1. The proposed method was applied to the determination of Cd in various cigarette (tobacco) samples which gave satisfactory results.     

PEAKING STORAGE TANKS FOR WATER SUPPLY SYSTEMS1

ABSTRACT: Construction of a “peaking storage tank” may reduce the operational cost of municipal water in the availability of a time-of-use energy rate. A peaking storage tank is used for storing water that is pumped from wells or other sources of supply during off-peak periods when energy costs are less for use during periods of on-peak water demand. The optimal size of a peaking storage tank is that which results in the minimum total cost, which includes both the storage construction cost and the cost of operation of the pumps. The operational cost for a given time-of-use rate is determined by help of a pipe network simulation model solved by the Newton-Raphson technique and a dynamic programming optimization model. A more simplified method is also introduced. Analyses show that low off-peak energy costs make the construction of peaking storage tanks economically attractive and reduce on-peak energy use, which results in electrical load leveling.     

Revealing source signatures in ambient BTEX concentrations

Management of ambient concentrations of Volatile Organic Compounds (VOCs) is essential for maintaining low ozone levels in urban areas where its formation is under a VOC-limited regime. The significant decrease in traffic-induced VOC emissions in many developed countries resulted in relatively comparable shares of traffic and non-traffic VOC emissions in urban airsheds. A key step for urban air quality management is allocating ambient VOC concentrations to their pertinent sources. This study presents an approach that can aid in identifying sources that contribute to observed BTEX concentrations in areas characterized by low BTEX concentrations, where traditional source apportionment techniques are not useful. Analysis of seasonal and diurnal variations of ambient BTEX concentrations from two monitoring stations located in distinct areas reveal the possibility to identify source categories. Specifically, the varying oxidation rates of airborne BTEX compounds are used to allocate contributions of traffic emissions and evaporative sources to observed BTEX concentrations.     

Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement.

One of the environmental issues in most regions of Iran is the large number of bottles made from poly-ethylene terephthalate (PET) deposited in domestic wastes and landfills. Due to the high volume of these bottles, more than 1 million m3 landfill space is needed for disposal every year. The purpose of this experimental study was to investigate the possibility of using PET waste in asphalt concrete mixes as aggregate replacement (Plastiphalt) to reduce the environmental effects of PET disposal. For this purpose the mechanical properties of plastiphalt mixes were compared with control samples. This study focused on the parameters of Marshall stability, flow, Marshall quotient (stability-to-flow ratio) and density. The waste PET used in this study was in the form of granules of about 3 mm diameter which would replace (by volume) a portion of the mineral coarse aggregates of an equal size (2.36-4.75 mm). In all prepared mixes the determined 6.6% optimum bitumen content was used. In this investigation, five different percentages of coarse aggregate replacement were used. The results showed that the aggregate replacement of 20% by volume with PET granules would result in a reduction of 2.8% in bulk compacted mix density. The value of flow in the plastiphalt mix was lower than that of the control samples. The results also showed that when PET was used as partial aggregate replacement, the corresponding Marshall stability and Marshall quotient were almost the same as for the control samples. According to most of specification requirement, these results introduce an asphalt mix that has properties that makes it suitable for practical use and furthermore, the recycling of PET for asphalt concrete roads helps alleviate an environmental problem and saves energy.     

Self body-size perception in an insect

Animals negotiating complex environments encounter a wide range of obstacles of different shapes and sizes. It is greatly beneficial for the animal to react to such obstacles in a precise, context-specific manner, in order to avoid harm or even simply to minimize energy expenditure. An essential key challenge is, therefore, an estimation of the animal’s own physical characteristics, such as body size. A further important aspect of self body-size perception (or SBSP) is the need to update it in accordance with changes in the animal’s size and proportions. Despite the major role of SBSP in functional behavior, little is known about if and how it is mediated. Here, we demonstrate that insects are also capable of self perception of body size and that this is a vital factor in allowing them to adjust their behavior following the sudden and dramatic growth associated with periodic molting. We reveal that locusts’ SBSP is strongly correlated with their body size. However, we show that the dramatic change in size accompanying adult emergence is not sufficient to create a new and updated SBSP. Rather, this is created and then consolidated only following the individuals’ experience and interaction with the physical environment. Behavioral or pharmacological manipulations can both result in maintenance of the old larval SBSP. Our results emphasize the importance of learning and memory-related processes in the development and update of SBSP, and highlight the advantage of insects as good models for a detailed study on the neurobiological and molecular aspects of SBSP.     

Time-series trend analysis and farmer perceptions of rainfall and temperature in northwestern Ethiopia

Environment, Development and Sustainability - Smallholder farmers are the most vulnerable community to climate change in Ethiopia since they rely heavily on the subsistence rain-fed farming system....     

Evaluation of workers' exposure to methylene diphenyl diisocyanate (MDI) in an automobile manufacturing company, Iran.

Evaluation of personal inhalation exposure to methylene diphenyl diisocyanate (MDI) among 39 employees, working in the window fixation and window glue processes in an automobile manufacturing company was performed. This study was conducted for both case and control groups. After sampling and sample preparation processes, MDI was determined with a UV-VIS spectrophotometer at 590 nm; the lung function was assessed with a digital spirometer, too. The average concentration of MDI in the window fixation, and window glue workplaces were 34.53 and 27.37 micro g/m3, respectively, which was lower than the threshold limit value (TLV) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) (51 micro g/m3). Respiratory symptoms in the exposed group were significantly different compared to the unexposed group (p < .05). Lung capacities in the case group were lower than in the control group (p < .05). Therefore, MDI can be easily measured making it possible to evaluate the adverse effects caused by occupational exposure.     

Discovering and characterizing farm households’ resilience under water scarcity

Water scarcity at an alarming rate has been a limiting factor for sustainable agriculture in arid and semi-arid environments of the world. It has resulted in a number of problems such as poverty and food insecurity among farm households. Therefore, building and improving resilience, as a way to mitigate the impacts of water scarcity, is important for farm households. But one of the significant steps for planning to improve farm households’ resilience under water scarcity is investigation of the current level of resilience of these households and understanding their variances. Therefore, this study offers a classification of farm households’ diversity based on resilience. Primary data were collected from 260 randomly selected farm households in 21 villages around Parishan wetland, Iran. Farm Household Resilience Scale was used to measure resilience. Cluster analysis suggested three groups: highly, medium-, and low-resilient farm households. The results of comparing three groups revealed that highly resilient farm households characterize with higher risk management, more agricultural water security, more positive psychological traits, and better knowledge management. Also, they had better water quality, attended more agricultural extension activities, and used modern irrigation systems. Farm households’ resilience map using GIS software illustrated that there is a relationship between resilience and farm location from the wetland. The findings of this study could be used by planner and policy-makers to improve farm households’ resilience in arid and semi-arid environments. Improvement in knowledge management system is recommended as one of the most effective policy instruments in building resilience.     

Adsorption of Crystal Violet Dye from Aqueous Solution by Poly(Acrylamide-<Emphasis Type="Italic">co</Emphasis>-Maleic Acid)/Montmorillonite Nanocomposite

Poly(acrylamide-co-maleic acid)/montmorillonite nanocomposites, were synthesized via in situ polymerization with different maleic acid and MMT content. The capability of the hydrogel for adsorption of crystal violet (CV) was investigated in aqueous solutions at different pH values and temperatures. The pseudo-second-order kinetics model could fit successfully the adsorption kinetic data. The effects of maleic acid to acrylamide molar ratio (MA_R), weight percent of MMT (MMT%), the pH of medium and the solution temperature (T) on the CV adsorption capacity (q _e ) of adsorbents were studied by Taguchi experimental design approach. The results indicated that increasing the MMT% leads to a greater q _e . The q _e value of adsorbents increased also with increasing both MA_R and pH, while reduced when the temperature of medium increased. The relatively optimum conditions to achieve a maximum CV adsorption capacity for P(AAm/MA)/MMT adsorbents were found as: 0.06 for MA_R and 5 % of MMT%, medium pH = 7 and T = 20 °C.     

Study of trace elements in wet atmospheric precipitation in Tehran,Iran

In this study, measurements of the trace metals Zn, Cd, Cr, Ni, Pb, Cu, Fe and Al were performed on 53 wet atmospheric precipitation samples (snow and rainwater) collected at a central site of Tehran. Samples were collected using a bulk sampler equipped with a high-density polyethylene funnel from November to May in 2011 and 2012 on the roof of a building in the city centre. Trace metals in the filtered samples were measured with ICP-MS. Statistical analysis of the results revealed that Al, which is principally a crustal-derived element, was the highest mean measured concentration. The pH ranged from 4.2 to 7.1 with a mean value of 5.1. Crustal enrichment factors (EF_c) related to the relative abundance of elements in crustal material was calculated using Al as reference crustal. EF_c calculations indicated that samples were not enriched with Fe and Cr but were, fairly to extremely, enriched with Zn, Cd, Ni, Pb and Cu. Factor component analysis with varimax-normalized rotation was conducted to find the probable sources of the measured species. This resulted in two factors with eigenvalues greater than unity. Factor 1 showed an anthropogenic source, mostly industrial combustion and local traffic emissions, for Zn, Cd, Ni, Pb, and Cu while factor 2 showed a crustal contribution for Al, Fe and Cr.